CNC Routing ACX Fir Plywood
ACX fir plywood suits paint-grade scenic panels, templates, and utility parts. Its face, back, and core quality differ from Baltic birch; plan the visible finish accordingly.
Stocked thicknesses
What will you make?
- Platform decking and scenic structure
- Paint-grade flats and backing panels
- One-off event builds and blocking
- Crate parts and shipping bases
Choosing this material
ACX fir plywood suits paint-grade scenic panels, templates, and utility parts. Its face, back, and core quality differ from Baltic birch; plan the visible finish accordingly.
Grain matching is off by default for the best sheet yield. Enable it on the Parts step if the face grain needs to run a particular direction; review the orientation on the proof.
Review before ordering
Check material, thickness, quantity, and every feature depth in the quote. Thickness and sheet availability below come from the current catalog. Critical fits and special grades should be reviewed with the shop.
Common uses
- Platform decking and scenic structure
- Paint-grade flats and backing panels
- One-off event builds and blocking
- Crate parts and shipping bases
- Shop fixtures and templates
- Sub-structure behind finished facings
Specs at a glance
| Available thicknesses | 1/8″–1″ in 1/8″ steps |
|---|---|
| Sheet sizes | 48″ × 96″ |
| Catalog names | ACX Fir |
| Tolerance | ±0.001″ achievable, material-dependent |
| Grain | Grain-sensitive. Nests for best yield by default; enable Grain matching to lock orientation. |
Frequently asked questions
What thicknesses and sheet sizes are available?
Choose from the current stock in the quote picker. The catalog specifications on this page are refreshed periodically; your quote checks current availability.
Can I supply my own sheets?
Yes. Choose customer-supplied material in the quote. The quote shows the per-sheet handling fee; coordinate suitability and drop-off with the shop.
What should I check before confirming?
Grain matching is off by default for the best sheet yield. Enable it on the Parts step if the face grain needs to run a particular direction; review the orientation on the proof.